Filtros
Filtrar por:
Tipo de publicación
- Artículo (1)
Autores
- ADRIAN CERVANTES URIBE (1)
- Alina De J. Zurita Yduarte (1)
- CLAUDIA GUADALUPE ESPINOSA GONZALEZ (1)
- Diana J. Gallegos Hernández (1)
- GLADIS JUDITH LABRADA DELGADO (1)
Años de Publicación
- 2022 (1)
Editores
- Elsevier (1)
Repositorios Orígen
Tipos de Acceso
- oa:openAccess (1)
Idiomas
Materias
- QUÍMICA (2)
- BIOLOGÍA Y QUÍMICA (1)
- Graphene nanoplatelets (1)
- Mixed oxides (1)
- Photocatalytic degradation (1)
Selecciona los temas de tu interés y recibe en tu correo las publicaciones más actuales
1 resultados, página 1 de 1
Alina De J. Zurita Yduarte Diana J. Gallegos Hernández URIEL ALEJANDRO SIERRA GOMEZ GLADIS JUDITH LABRADA DELGADO SALVADOR FERNANDEZ TAVIZON Pedro Jesús Herrera Franco SRINIVAS GODAVARTHI JOSE GILBERTO TORRES TORRES ADRIAN CERVANTES URIBE CLAUDIA GUADALUPE ESPINOSA GONZALEZ (2022, [Artículo])
"New ternary materials TiO2-Al2O3-GnPs (TAG) were prepared by using an innocuous sol-gel method with a slight modification for the addition of graphene nanoplatelets (GnPs), under room temperature and atmospheric pressure. The materials TiO2-Al2O3-GnPs were prepared with variations of concentration between 0.05 and 1 wt % of GnPs. In this study, we analyzed the physicochemical properties by X-ray diffraction (XRD) and UV-Vis spectroscopy, textural properties by N2 physisorption, morphology by scanning and transmission electron microscopy (SEM, TEM) and a chemical species analysis was carried out by X-ray photoelectron spectroscopic (XPS). The photocatalytic activity of each material was evaluated in the degradation of a model molecule, Diuron, a carcinogenic and cytotoxic herbicide used in farm fields. To determine reaction selectivity and mineralization degree, the photocatalytic reaction was monitored by using UV-Vis spectroscopy and total organic carbon (TOC). In samples with higher GnPs’ concentration, a good enough specific surface area of up to 379 m2/g was observed, and reduced band gap energy (2.8 eV) with respect to TiO2 and mixed oxide (3.2 and 3.1 eV respectively), was obtained. These resulting properties were the key indicator so that the materials could be applied as photocatalysts. In the photocatalytic activity determination, TAG-0.75 was the sample that showed the best results with respect to the mixed oxide; the highest photocatalytic conversion, the reduced average life time, and increased mineralization and reaction selectivity."
Graphene nanoplatelets Mixed oxides Sol-gel Photocatalytic degradation BIOLOGÍA Y QUÍMICA QUÍMICA QUÍMICA