Offshore wind energy climate projection using UPSCALE climate data under the RCP8.5 emission scenario

MARKUS SEBASTIAN GROSS (2016, [Artículo])

In previous work, the authors demonstrated how data from climate simulations can be utilized to estimate regional wind power densities. In particular, it was shown that the quality of wind power densities, estimated from the UPSCALE global dataset in offshore regions of Mexico, compared well with regional high resolution studies. Additionally, a link between surface temperature and moist air density in the estimates was presented. UPSCALE is an acronym for UK on PRACE (the Partnership for Advanced Computing in Europe)-weather-resolving Simulations of Climate for globAL Environmental risk. The UPSCALE experiment was performed in 2012 by NCAS (National Centre for Atmospheric Science)- Climate, at the University of Reading and the UK Met Office Hadley Centre. The study included a 25.6-year, five-member ensemble simulation of the HadGEM3 global atmosphere, at 25km resolution for present climate conditions. The initial conditions for the ensemble runs were taken from consecutive days of a test configuration. In the present paper, the emphasis is placed on the single climate run for a potential future climate scenario in the UPSCALE experiment dataset, using the Representation Concentrations Pathways (RCP) 8.5 climate change scenario. Firstly, some tests were performed to ensure that the results using only one instantiation of the current climate dataset are as robust as possible within the constraints of the available data. In order to achieve this, an artificial time series over a longer sampling period was created. Then, it was shown that these longer time series provided almost the same results than the short ones, thus leading to the argument that the short time series is sufficient to capture the climate. Finally, with the confidence that one instantiation is sufficient, the future climate dataset was analysed to provide, for the first time, a projection of future changes in wind power resources using the UPSCALE dataset. It is hoped that this, in turn, will provide some guidance for wind power developers and policy makers to prepare and adapt for climate change impacts on wind energy production. Although offshore locations around Mexico were used as a case study, the dataset is global and hence the methodology presented can be readily applied at any desired location. © Copyright 2016 Gross, Magar. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reprod

atmosphere, climate change, Europe, Mexico, sampling, time series analysis, university, weather, wind power, climate, risk, theoretical model, wind, Climate, Models, Theoretical, Risk, Wind CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA CIENCIAS DE LA TIERRA Y DEL ESPACIO OCEANOGRAFÍA OCEANOGRAFÍA

Modular ontology to support manufacturing SMEs toward industry 4.0

ZAIDA ANTONIETA MORA ALVAREZ OSCAR HERNANDEZ URIBE RAMON ALBERTO LUQUE MORALES LEONOR ADRIANA CARDENAS ROBLEDO (2023, [Artículo])

Industry 4.0 (I4.0) implementation is a hot topic among manufacturing organizations to reach smart factory status and integrate a fully connected ecosystem. Achieving such a transition presents notable challenges for Small and Medium Enterprises (SMEs) since they often face resource and skilled personnel limitations. This study developed a domain ontology to represent various stages of maturity toward I4.0 implementation. Ontology provides a tool for SMEs to self-assess in situations of machines, processes, and factories for the dimensions of control, integration, and intelligence. This study focused on the identification of classes and relationships according to I4.0 implementation situations in the context of a manufacturing setting, the reuse of ontologies related to the domain of observations to model situations, and the creation and validation of the ontology through the information obtained from the questionnaires applied to SMEs. Finally, the ontology delivers a tool to understand SMEs' current state concerning I4.0 implementation and plan based on informed decisions about the maturity state and the technology required to advance to the next stage in their manufacturing processes.

This study was partially supported by the grants CONAHCYT-CIATEQ CVU 899567 and 162867 and CONAHCYT SNI.

We express our gratitude to Teresa Novales Hernandez for the library support.

Domain ontology Industry 4.0 SMEs Smart factory SPARQL Semantic web INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

Panorama de la desaparición de personas en Guerrero, 2015-2021.

GABINO SOLANO RAMIREZ (2023, [Artículo])

This work offers a general overview of the disappearance of persons in Guerrero during the period 2015- 2021 seen from the reports published in the local press, and some national media. The objective is to make visible this serious social problem, considered a crime against humanity and of the greatest concern for families and citizens who perceive the feeling of impunity and insecurity. The study follows up on basic indicators of the victims of disappearance, such as the modality (kidnapping, uprising, confrontation, and home invasion), general characteristics of the victims, alleged perpetrators, places and circumstances of the event. Considering the phenomenon as a public issue, the work aims to raise awareness among the population and institutional structures to motivate the generation of strategies to help prevent these disappearances.

Forced Disappearance of Persons Criminal Violence Guerrero pi.evi-UAGro newspaper library CIENCIAS SOCIALES CIENCIA POLÍTICA SOCIOLOGÍA POLÍTICA CONFLICTOS SOCIALES

Determinantes del comportamiento de queja del consumidor en México

Determinants of consumer complaint behavior in Mexico

IGNACIO JAVIER CRUZ RODRIGUEZ JAVIER GALAN FIGUEROA (2019, [Artículo])

El objetivo del trabajo es explicar los determinantes del comportamiento de queja del consumidor en los niveles socioeconómico y empresa. Para ello se acude a la metodología de datos de panel estático a fin de estimar el impacto de los determinantes de las quejas de los consumidores. Los resultados a nivel socioeconómico indican que las quejas se encuentran determinadas por el ingreso, las conciliaciones a favor de los consumidores y por la población residente en zonas urbanas. Mientras a nivel empresa los resultados muestran que tanto la cuota de mercado como el tamaño de la firma afectan positivamente las quejas. Se concluye que los resultados coinciden con la literatura revisada y que se puede esperar un aumento en el número de quejas presentadas por los consumidores.

This work aims to quantify the determinants of consumer complaint behavior in socioeconomic and business levels. For this purpose, the static panel data methodology is used in order to estimate the impact of consumer complaints both at the federal level of the Mexican Republic and at the level of the main companies that are considered leaders in their field. The results by the state indicate that the complaints are determined by income, reconciliations in favor of consumers and population residing in urban areas.While at the company level, the results show that both market share and company size positively affect consumer complaints. In conclusion, the results agree with the literature reviewed, and a rise in the number of complaints is possible.

HUMANIDADES Y CIENCIAS DE LA CONDUCTA Datos de panel Efectos fijos y efectos aleatorios Satisfacción de los consumidores Quejas del consumidor Panel data models Fixed effects and random effects Consumer complaint

Economics of crop residue management

Vijesh Krishna Maxwell Mkondiwa (2023, [Artículo])

More than five billion metric tons of agricultural residues are produced annually worldwide. Despite having multiple uses and significant potential to augment crop and livestock production, a large share of crop residues is burned, especially in Asian countries. This unsustainable practice causes tremendous air pollution and health hazards while restricting soil nutrient recycling. In this review, we examine the economic rationale for unsustainable residue management. The sustainability of residue utilization is determined by several economic factors, such as local demand for and quantity of residue production, development and dissemination of technologies to absorb excess residue, and market and policy instruments to internalize the social costs of residue burning. The intervention strategy to ensure sustainable residue management depends on public awareness of the private and societal costs of open residue burning.

Crop Biomass Residue Burning Environmental Effects CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CROPS BIOMASS RESIDUES ENVIRONMENTAL IMPACT CLIMATE CHANGE SMALLHOLDERS TECHNOLOGY ADOPTION

Influence of residue type and method of placement on dynamics of decomposition and nitrogen release in maize-wheat-mungbean cropping on permanent raised beds: a litterbag study

ML JAT Rajeev Gupta (2022, [Artículo])

Decomposition Rate Nitrogen Release Placement Effect CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CROP RESIDUES DEGRADATION NITROGEN PLACEMENT

El cuerpoestigma: identidad corpórea a partir de lo repugnante y la violencia en El monstruo pentápodo, de Liliana Blum

Omar Armando Paredes Crespo (2023, [Otro, Trabajo terminal, especialidad])

58 páginas. Especialización en Literatura Mexicana del Siglo XX.

Esta investigación recibió el apoyo del Sistema Nacional de Posgrados del Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT).

La presente investigación analiza la construcción de la identidad corpórea en El monstruo pentápodo (Tusquets, 2017), de Liliana Blum (Durango, 1974), a partir de las nociones de repugnancia y violencia. La relación entre cuerpo, repugnancia y violencia es una recurrente establecida en parte de su obra: Pandora (Tusquets, 2015) y Cara de liebre (Seix Barral, 2020) son otras narrativas que dan cuenta sobre esta preocupación, debido a que en ellas se advierte un planteamiento vinculado con lo que en esta tesina conceptualizo como cuerpoestigma, idea que engloba la construcción física y simbólica del cuerpo femenino a partir de un rasgo que lo particulariza despersonalizándolo; en consecuencia, lo hace vulnerable. Se trata de una sinécdoque corpórea que potencializa una característica física con la finalidad de que lo diferente se constituya como el cuerpo mismo. De esta manera, la gordura (en el caso de Pandora), la cicatriz del labio (en Cara de liebre) o el enanismo (en El monstruo pentápodo) se transforman en marcas totales que crean identidades corpóreas femeninas. Así, el cuerpo es utilizado por la narradora como un elemento retórico de lo repugnante, lo (in)visible y lo violen(tado)to, mismo que funciona para crear personajes que interiorizan sobre su condición física, psico-emocional y sexual. Los rasgos físicos de éstos propician situaciones crueles y agresivas en ambos sentidos: Aimeé es una mujer que provoca y siente repugnancia; asimismo, es violenta y violentada. La relación cuerpo-repugnancia-violencia es uno de los mayores rasgos a explorar en esta novela de Liliana Blum. Con El monstruo pentápodo, la autora explora la violencia atroz y el machismo imperante en México, temas que ocupan las páginas de su literatura.

Human body in literature--History and criticism. Self-acceptance in literature. Violence in literature. Short stories, Mexican. Cuerpo humano en la literatura. Autoaceptación (Psicología) Violencia en la literatura. PN3435 HUMANIDADES Y CIENCIAS DE LA CONDUCTA CIENCIAS DE LAS ARTES Y LAS LETRAS TEORÍA, ANÁLISIS Y CRÍTICA LITERARIAS

Modeling the growth, yield and N dynamics of wheat for decoding the tillage and nitrogen nexus in 8-years long-term conservation agriculture based maize-wheat system

C.M. Parihar Dipaka Ranjan Sena Prakash Chand Ghasal Shankar Lal Jat Yashpal Singh Saharawat Mahesh Gathala Upendra Singh Hari Sankar Nayak (2024, [Artículo])

Context: Agricultural field experiments are costly and time-consuming, and their site-specific nature limits their ability to capture spatial and temporal variability. This hinders the transfer of crop management information across different locations, impeding effective agricultural decision-making. Further, accurate estimates of the benefits and risks of alternative crop and nutrient management options are crucial for effective decision-making in agriculture. Objective: The objective of this study was to utilize the Crop Environment Resource Synthesis CERES-Wheat model to simulate crop growth, yield, and nitrogen dynamics in a long-term conservation agriculture (CA) based wheat system. The study aimed to calibrate the model using data from a field experiment conducted during the 2019-20-2020-21 growing seasons and evaluation it with independent data from the year 2021–22. Method: Crop simulation models, such as the Crop Environment Resource Synthesis CERES-Wheat (DSSAT v 4.8), may provide valuable insights into crop growth and nitrogen dynamics, enabling decision makers to understand and manage production risk more effectively. Therefore, the present study employed the CERES-Wheat (DSSAT v 4.8) model and calibrated it using field data, including plant phenological phases, leaf area index, aboveground biomass, and grain yield from the 2019-20-2020-21 growing seasons. An independent dataset from the year 2021–22 was used for model evaluation. The model was used to investigate the relationship between growing degree days (GDD), temperature, nitrate and ammonical concentration in soil, and nitrogen uptake by the crop. Additionally, the study explored the impact of contrasting tillage practices and fertilizer nitrogen management options on wheat yields. The experimental site is situated at ICAR-Indian Agricultural Research Institute (IARI), New Delhi, representing Indian Trans-Gangetic Plains Zone (28o 40’N latitude, 77o 11’E longitude and an altitude of 228 m above sea level). The treatments consist of four nitrogen management options, viz., N0 (zero nitrogen), N150 (150 kg N ha−1 through urea), GS (Green seeker based urea application) and USG (urea super granules @150 kg N ha−1) in two contrasting tillage systems, i.e., CA-based zero tillage (ZT) and conventional tillage (CT). Result: The outcomes exhibited favorable agreement between the model’s simulations and the observed data for crop phenology (With less than 2 days variation in 50% onset of flowering), grain and biomass yield (Root mean square error; RMSE 336 kg ha−1 and 649 kg ha−1, respectively), and leaf area index (LAI) (RMSE 0.28 & normalized RMSE; nRMSE 6.69%). The model effectively captured the nitrate-N (NO3−-N) dynamics in the soil profile, exhibiting a remarkable concordance with observed data, as evident from its low RMSE = 12.39 kg ha−1 and nRMSE = 13.69%. Moreover, as it successfully simulated the N balance in the production system, the nitrate leaching and ammonia volatilization pattern as described by the model are highly useful to understand these critical phenomena under both conventional tillage (CT) and CA-based Zero Tillage (ZT) treatments. Conclusion: The study concludes that the DSSAT-CERES-Wheat model has significant potential to assess the impacts of tillage and nitrogen management practices on crop growth, yield, and soil nitrogen dynamics in the western Indo-Gangetic Plains (IGP) region. By providing reliable forecasts within the growing season, this modeling approach can facilitate better planning and more efficient resource management. Future implications: The successful implementation of the DSSAT-CERES-Wheat model in this study highlights its applicability in assessing crop performance and soil dynamics. Future research should focus on expanding the model’s capabilities by reducing its sensitivity to initial soil nitrogen levels to refine its predictions further. Moreover, the model’s integration with decision support systems and real-time data can enhance its usefulness in aiding agricultural decision-making and supporting sustainable crop management practices.

Nitrogen Dynamics Mechanistic Crop Growth Models Crop Simulation CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA NITROGEN CONSERVATION AGRICULTURE WHEAT MAIZE CROP GROWTH RATE SIMULATION MODELS

Análisis de las conexiones matemáticas en la enseñanza y aprendizaje de la derivada basado en un networking of theories entre la Teoría de las conexiones y el Enfoque ontosemiótico.

CAMILO ANDRES RODRIGUEZ NIETO (2021, [Tesis de doctorado])

Consejo Nacional de Ciencia y Tecnología No. 602990

In research in Mathematics Education, models have been reported to analyze mathematical connections in which specific connection categories are considered. In the literature, it was identified that the most used model is the Businskas with contributions from other researchers. However, the problem refers to the fact that some categories of connections limit the analysis of mathematical activity and, therefore, the research suggests that the established categories are validated and, if possible, new categories of connections are reported. Other investigations focused on exploring mathematical connections and understanding the derivative reveal that high school students, pre-service teachers, and some in-service mathematics teachers have difficulty connecting multiple representations of the derivative (e.g., algebraic, or symbolic, verbal, graphic, tabular) and establish connections between partial meanings about this concept.

Networking of theories Mathematical connections Onto-semiotic approach semiotic function derivative teacher students HUMANIDADES Y CIENCIAS DE LA CONDUCTA PEDAGOGÍA TEORÍA Y MÉTODOS EDUCATIVOS TEORÍAS EDUCATIVAS

Análisis de la actividad de ondas del este y su impacto en la variabilidad intraestacional de precipitación en el trópico mexicano

MAURA GONZALEZ ROBLES (2021, [Tesis de doctorado])

Tesis (Doctora en Ciencias y Tecnología del Agua) -- Instituto Mexicano de Tecnología del Agua. Coordinación de Desarrollo Profesional e Institucional. Subcoordinación de Posgrado.

En este trabajo se analizaron los sistemas atmosféricos que aportan variabilidad climática a México y Centroamérica, es decir: la Corriente en Chorro del Caribe (CCC) y las ondas del este (OE). Ambos sistemas aportan humedad, principalmente en Centroamérica, Golfo de México y Océano Pacífico; además, son importantes para los trópicos al modular la convección cuya variabilidad puede afectar el número de huracanes en el Atlántico y modificar la precipitación causando estragos como deslaves, inundaciones, daños en infraestructura y socioeconómicos. Los datos utilizados en este estudio son de Reanálisis ERA-Interim, con resolución temporal horaria y espacial de 75 km; para la precipitación se utilizaron datos de ERA-5, con resolución espacial de 9 km. La CCC y las OE son fenómenos que interactúan a escala local con diferentes tipos de sistemas característicos de latitudes tropicales con variabilidad estacional, anual e interanual. Para analizar la variabilidad se identificaron y analizaron años Niño, Niña y neutro significativos, esto por ser la causa de la mayor variabilidad climática en el trópico. El análisis de variabilidad aplicado es de largo plazo (30 años) e incluyó, entre otros resultados, obtener la magnitud del viento en un punto máximo del núcleo de la CCC (14.25°N y 73.5°W) por año; en junio, julio y agosto (JJA) (septiembre, octubre y noviembre, SON) y se encontró tanto en julio y en el trimestre de JJA, la CCC es más intensa durante años Niño (Niña) ya que varía entre 12 a 18 m/s (menor a 12 m/s), con una extensión zonal de entre 8° a 14° (menor a 10°) y meridional de entre 5° a 6° respectivamente (menor a 4°) lo que da como resultado cambios en los valores de cizalla ideales para contribuir con la ciclogénesis, los cuales deben ser mayores a 10 m/s (7.5 m/s) y menores a 16 m/s (12.2 m/s).

Corrientes en chorro del Caribe Ondas del este Factores meteorológicos CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA