Development of a thermoelectric test for electrical contactors

PABLO OROZCO CORRAL FRANCISCO JAVIER IBARRA VILLEGAS NOE VILLA VILLASEÑOR (2023, [Artículo])

In the economic model in which we develop, there is a dependence on the means of transport that every day is increasing and due to the importance of electrification in the issue of efficient and clean transportation, has caused the need for companies supplying components for automotive manufacturers to evolve and develop new technologies to stay ahead of the needs of their customers being in full evolution towards electrified transport. This evolution extends not only to manufacturing but to the test methods that currently exist, since automotive standards require suppliers to test in laboratory, the components they sell to their customers to ensure their correct operation.

Electrical contactors Powered thermal cycle endurance Busbars Electrification industry INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

The fate of rice crop residues and context-dependent greenhouse gas emissions: Model-based insights from Eastern India

Sonam Sherpa virender kumar Andrew Mcdonald (2024, [Artículo])

Crop residue burning is a common practice in many parts of the world that causes air pollution and greenhouse gas (GHG) emissions. Regenerative practices that return residues to the soil offer a ‘no burn’ pathway for addressing air pollution while building soil organic carbon (SOC). Nevertheless, GHG emissions in rice-based agricultural systems are complex and difficult to anticipate, particularly in production contexts with highly variable hydrologic conditions. Here we predict long-term net GHG fluxes for four rice residue management strategies in the context of rice-wheat cropping systems in Eastern India: burning, soil incorporation, livestock fodder, and biochar. Estimations were based on a combination of Tier 1, 2, and 3 modelling approaches, including 100-year DNDC simulations across three representative soil hydrologic categories (i.e., dry, median, and wet). Overall, residue burning resulted in total direct GHG fluxes of 2.5, 6.1, and 8.7 Mg CO2-e in the dry, median, and wet hydrologic categories, respectively. Relative to emissions from burning (positive values indicate an increase) for the same dry to wet hydrologic categories, soil incorporation resulted in a −0.2, 1.8, or 3.1 Mg CO2-e change in emissions whereas use of residues for livestock fodder increased emissions by 2.0, 2.1, or 2.3 Mg CO2-e. Biochar reduced emissions relative to burning by 2.9 Mg CO2-e in all hydrologic categories. This study showed that the production environment has a controlling effect on methane and, therefore, net GHG balance. For example, wetter sites had 2.8–4.0 times greater CH4 emissions, on average, than dry sites when rice residues were returned to the soil. To effectively mitigate burning without undermining climate change mitigation goals, our results suggest that geographically-target approaches should be used in the rice-based systems of Eastern India to incentivize the adoption of regenerative ‘no burn’ residue management practices.

Soil Carbon Rice Residue Burning Life Cycle Assessment CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA SOIL CARBON RICE LIFE CYCLE GREENHOUSE GASES CLIMATE CHANGE

Análisis de velocidad de soldadura robotizada para proceso MIG en acero1045 AISI

Carlos Eduardo Hernández Acero (2022, [Tesis de maestría])

Esta investigación denominada “análisis de velocidad de soldadura robotizada para proceso MIG en acero 1045 AISI” busca el desarrollo de un modelo matemático que permita, mediante parámetros conocidos, el cálculo de la penetración de soldadura en piezas unidas con proceso Metal Inert Gas (MIG). El objetivo se centra en buscar la combinación de valores paramétricos para la velocidad de soldadura, el voltaje y la corriente, los que se obtienen mediante la aplicación de un diseño experimental, que, ejecutadas en el proceso, pueda lograr una penetración de soldadura aceptable para la unión de la pieza. El modelo de superficie de respuesta aplicado fue un diseño de experimentos 2k con diseño central compuesto, y posteriormente el modelo se utilizó para estimar la velocidad de soldadura. Este diseño de experimentos se ejecutó por medio del programa estadístico Minitab versión 17. (Hernández Acero et al., 2022). Una vez teniendo la penetración de soldadura deseada en la pieza, se puede calcular la velocidad de soldadura necesaria para el cálculo de tiempo ciclo y utilizar los parámetros definidos de corriente y voltaje. Los valores de estos factores serán útiles para comenzar la programación del robot ya con la celda funcional y reducir el tiempo de arranque en automático (Hernández Acero et al., 2022).

This research, named “robotic welding speed analysis for MIG process in 1045 AISI steel”, seeks to develop a mathematical model that allow, through know parameters, the calculation of welding penetration in parts joined with Metal Inert Gas (MIG) process. The objective is focused on finding the combination of parametric values for robot welding speed, voltage and current, which are obtained through the application of a design of experiments, which, executed in the process, can achieve an acceptable welding penetration for the union of the part. The response surface model applied was a 2k design of experiments with central composite design, and subsequently the model was used to estimate the welding speed. This design of experiments was obtained using the statistical software Minitab version 17. (Hernández Acero et al., 2022). Once having the desired welding penetration in the part, it can calculate the welding speed necessary for the cycle time calculation and use the defined parameters of current and voltage to start programming the robot with the functional cell and reduce the time of startup (Hernández Acero et al., 2022).

Soldadura MIG Penetración Tiempo ciclo Velocidad de soldadura MIG welding Penetration Cycle time Welding speed INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS OTRAS ESPECIALIDADES TECNOLÓGICAS OTRAS OTRAS

A comprehensive account of SARS-CoV-2 genome structure, incurred mutations, lineages and COVID-19 vaccination program

Shailendra Sharma deepmala sehgal Apekshita Singh Shailendra Goel SoomNath Raina (2022, [Artículo])

Corona Viruses Genome Structure Novel Mutations Resistance to Vaccines SARS-CoV-2 CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA COVID-19 ANTIBODY FORMATION LIFE CYCLE VACCINATION VACCINES LINEAGE

Advancing the science and practice of ecological nutrient management for smallholder farmers

Sieglinde Snapp (2022, [Artículo])

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA AGROECOLOGY DEGRADATION NUTRIENT CYCLES NUTRIENT USE EFFICIENCY SOIL ORGANIC MATTER SMALLHOLDERS

Character association study in maize hybrids developed through integration of rapid cycle genomic selection and doubled haploid technology for heat stress tolerance

Prakash Kuchanur Ayyanagouda Patil Pervez Zaidi vinayan mt (2023, [Artículo])

Multi-Parental Synthetics Rapid Cycle Genomic Selection Phenotypic Correlation CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA MAIZE HEAT STRESS MARKER-ASSISTED SELECTION DOUBLED HAPLOIDS PHENOTYPIC VARIATION CLIMATE CHANGE

Solar Irrigation Pump (SIP) sizing tool: user manual (Beta version)

Santosh Mali Paresh Shirsath (2022, [Libro])

CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA SOLAR POWERED IRRIGATION SYSTEMS PUMPS IRRIGATION WATER MANUALS

Value chain research and development: The quest for impact

Jason Donovan (2023, [Artículo])

Motivation: For decades, governments, donors, and practitioners have promoted market-based development approaches (MBDA), most recently in the form of value chain development (VCD), to spur economic growth and reduce poverty. Changes in approaches have been shaped by funders, practitioners and researchers in ways that are incompletely appreciated. Purpose: We address the following questions: (1) how have researchers and practitioners shaped discussions on MBDA?; and (2) how has research stimulated practice, and how has practice informed research? We hypothesize that stronger exchange between researchers and practitioners increases the relevance and impact of value chain research and development. Methods and approach: We adopt Downs' (1972) concept of issue-attention cycles, which posits that attention to a particular issue follows a pattern where, first, excitement builds over potential solutions; followed by disenchantment as the inherent complexity, trade-offs, and resources required to solve it become apparent; and consequently attention moves on to a new issue. We review the literature on MBDA to see how far this framing applies. Findings: We identify five cycles of approaches to market-based development over the last 40 or more years: (1) non-traditional agricultural exports; (2) small and medium enterprise development; (3) value chains with a globalization perspective; (4) value chains with an agri-business perspective; and (5) value chain development. The shaping and sequencing of these cycles reflect researchers' tendency to analyse and criticize MBDA, while providing limited guidance on workable improvements; practitioners' reluctance to engage in critical reflection on their programmes; and an institutional and funding environment that encourages new approaches. Policy implications: Future MBDA will benefit from stronger engagement between researchers, practitioners, and funders. Before shifting attention to new concepts and approaches, achievements and failures in previous cycles need to be scrutinized. Evidence-based practice should extend for the length of the issue-attention cycle; preferably it should arrest the cycling of attention. Funders can help by requiring grantees to critically reflect on past action, by providing “safe spaces” for sharing such reflections, and by engaging in joint learning with practitioners and researchers.

Agri-Food Value Chains Issue-Attention Cycles Market-Based Development Approaches CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA VALUE CHAINS PRIVATE SECTOR RURAL DEVELOPMENT SMALLHOLDERS

Supervivencia de Artemia franciscana en cocultivo con Vibrio campbellii y Nitzschia thermalis f. kurta

Survival of Artemia franciscana in coculture with Vibrio campbellii and Nitzschia thermalis f. kurta

Dalia Azucena Verde Inzunza (2023, [Tesis de maestría])

La acuicultura es uno de los sectores más importantes y de mayor producción alimentaria. Sin embargo, se ve afectada por enfermedades bacterianas como la vibriosis, la cual puede ocasionar pérdidas totales en los cultivos. El método más utilizado para controlar la vibriosis es el uso de antibióticos, lo cual ha contribuido al desarrollo de cepas bacterianas resistentes. Por ello, se buscan medios de control naturales para inhibir el crecimiento de Vibrio, como el uso de aguas verdes. El objetivo de este trabajo fue evaluar el efecto inhibitorio de Nitzschia thermalis f. kurta en la concentración de V. campbellii y en la supervivencia de nauplios de Artemia franciscana al estar en cocultivo. Se realizó un bioensayo de inhibición de V. campbellii en cocultivo con N. thermalis y nauplios de A. franciscana. Se mantuvieron cultivos monoespecíficos, no axénicos y por triplicado en medio “f” con una densidad celular de 250,000 cél. mL-1 de N. thermalis. Los cultivos fueron inoculados con una concentración inicial de 1 x105 V. campbellii mL-1 y una densidad de 1 nauplio de A. franciscana mL-1. Para cada tratamiento se evaluó la densidad celular de N. thermalis, conteo de bacterias heterotróficas, cuantificación de la concentración de V. campbellii y la supervivencia de nauplios de A. franciscana durante 5 días. Se obtuvo una supervivencia promedio de 55% de nauplios de A. franciscana al estar en cocultivo con N. thermalis. Mientras que el tratamiento control sin la presencia de N. thermalis obtuvo una supervivencia de nauplios de A. franciscana del 0%. El contenido de bacterias heterotróficas se presentó en todos los tratamientos en un orden de magnitud de 106 UFC mL-1, lo cual nos indica que el efecto inhibitorio de N. thermalis es específico para V. campbellii. La concentración de V. campbellii disminuyó a 53 V. campbellii mL-1 al día 5 en el cocultivo de V. campbellii con N. thermalis y nauplios de A. franciscana. Se concluye que N. thermalis tiene un efecto inhibitorio contra V. campbellii y brinda protección a los nauplios de A. franciscana en cocultivo con V. campbellii.

Aquaculture is one of the most important sectors with the highest food production. However, it is affected by bacterial diseases such as vibriosis, which can cause total crop losses. The most used method to control vibriosis is antibiotics, which have contributed to the developing of resistant bacterial strains. For this reason, natural control means are sought to inhibit Vibrio growth, such as using green water. This work aimed to evaluate the inhibitory effect of Nitzschia thermalis f. kurta in the concentration of V. campbellii and the survival of Artemia franciscana nauplii when in coculture. An inhibition bioassay of V. campbellii was carried out in coculture with N. thermalis and nauplii of A. franciscana. Monospecific, non-axenic cultures were maintained in triplicate in “f” medium with a cell density of 250,000 cells mL-1 of N. thermalis. The cultures were inoculated with an initial concentration of 1 x105 V. campbellii mL-1 and a density of 1 nauplius of A. franciscana mL-1. For each treatment, the cell density of N. thermalis, count of heterotrophic bacteria, quantification of the concentration of V. campbellii, and the survival of A. franciscana nauplii were evaluated for 5 days. Was obtained an average survival of 55% of A. franciscana nauplii when cocultured with N. thermalis. In contrast, the control treatment without the presence of N. thermalis obtained a survival of A. franciscana nauplii of 0%. The content of heterotrophic bacteria was present in all treatments in order of magnitude of 106 CFU mL-1, which indicates that the inhibitory effect of N. thermalis is specific to V. campbellii. The concentration of V. campbellii decreased to 53 V. campbellii mL-1 on day 5 in the co-culture of V. campbellii with N. thermalis and A. franciscana nauplii. It is concluded that N. thermalis has an inhibitory effect against V. campbellii and provides protection to A. franciscana nauplii in coculture with V. campbellii.

Artemia franciscana, Vibrio campbellii, inhibición, Nitzschia thermalis Artemia franciscana, Vibrio campbellii, inhibition, Nitzschia thermalis CIENCIAS AGROPECUARIAS Y BIOTECNOLOGÍA CIENCIAS AGRARIAS PECES Y FAUNA SILVESTRE PISCICULTURA PISCICULTURA

La relación entre el crimen y ciclo económico en México: un enfoque espacial

Ricardo Masahiro Solis Ichien (2021, [Tesis de maestría])

En este trabajo se analiza la influencia del ciclo económico sobre los niveles de crimen en México desde el marco conceptual de la teoría de Cantor y Land (1985), los cuales distinguen el efecto de oportunidad y motivación criminal. Se presenta el análisis para el caso mexicano y se evalúa empíricamente el modelo de Cantor y Land para las 32 entidades federativas con datos trimestrales del 2010 a 2019. Utilizando un modelo econométrico que incorpora la interacción espacial en la tasa de crímenes y en el término de error, así como su rezago temporal, al que se le denomina como modelo espacial autorregresivo con errores autorregresivos de orden 1 (SARAR (1,1)) dinámico, se evalúa el modelo para siete tipos de crímenes: homicidios dolosos, secuestros, extorsiones, robo a negocios, robo a casa-habitación, robo de vehículo y robo a transeúnte. Los resultados muestran que se verifica la teoría de Cantor y Land (1985) para cuatro de los siete tipos de delitos. Los robos analizados se caracterizan como robos de necesidad y robos de especialización. Se encuentra evidencia del comportamiento espacial de la actividad criminal donde algunos delitos tienen un efecto regional y otros se concentran.

Crime -- Effect of business cycles on -- Mexico -- Econometric models. Violence -- Effect of business cycles on -- Mexico -- Econometric models. CIENCIAS SOCIALES CIENCIAS SOCIALES